System Neutraliser is designed to neutralise any acid in the system after cleaning with an acid cleaner, such as Fernox DS40 Descaler & Cleaner, ensuring compliance with environmental regulations before disposing of waste water. System Neutraliser also conditions the system for the application of a corrosion and scale inhibitor.
Neutralises system water after using DS40 System Descaler & Cleaner
Conditions system for application of corrosion inhibitor
Ensures compliance with environmental regulations
Convenient to use 500ml liquid for easy dosing with powerflushing units, or application via F&E tank or dosing vessel (for sealed systems)
For detailed instructions on carrying out cleaning of central heating systems using DS40 Descaler & Cleaner and Neutraliser, please refer to the instruction leaflet inside the DS40 box. The product can be poured directly into a powerflushing unit; via the F&E tank or, in a sealed system, via a suitable dosing vessel into a radiator. After adding the System Neutraliser, allow any debris to settle and check the colour of the system water. The water should be yellow in colour. If the water is still red, more neutraliser will need to be added. The system must be drained down and flushed several times with fresh water until the water running to drain is clear. After the final drain, it is recommended that the system is inhibited using a suitable Fernox Protector. In single feed indirect cylinders, e.g. ‘Primatic’ systems or similar, potable water chemicals must be used.
