The Express Inhibitor Test provides a rapid on-site analysis of the concentration of all Fernox Protectors, and other molybdate based inhibitors, in central heating system water. Easy and intuitive to use, it is a quick and simple testing method to establish the presence of inhibitor within the system. Testing the concentration of inhibitor allows compliance with local regulations and best practice, and may be required to comply with boiler warranties.
1. Take a sample of system water which is representative of the system as a whole (drain the water for several seconds before taking the sample)
2. Dip the test strip into the system water for one second and remove
3. Compare to colour chart within 10 seconds
4. Select the colour which most accurately represents the colour observed on the test strip tom confirm the system is fully protected against corrosion and scale formation.
Product Code | Single Unit Dimensions(Height x Width x Depth) | Single Unit Barcode | Outer Carton Dimensions(Height x Width x Depth) | Outer Carton Barcode (ITF) |
|---|---|---|---|---|
62540 |
3.39 x 1.14 x 1.14 inches |
5014551625402 |
4.33 x 5.91 x 7.09 inches |
05014551003064 |
© Fernox 2024. All rights reserved
