Express Inhibitor Test

Product Code: 62540

The Express Inhibitor Test provides a rapid on-site analysis of the concentration of all Fernox Protectors, and other molybdate based inhibitors, in central heating system water. Easy and intuitive to use, it is a quick and simple testing method to establish the presence of inhibitor within the system. Testing the concentration of inhibitor allows compliance with local regulations and best practice, and may be required to comply with boiler warranties.

  • Quick and simple on-site testing of inhibitor concentration
  • One test strip per system. Each pot contains 50 test strips.
  • Suitable for testing all molybdate-based inhibitors
  • Easy compliance with local regulations and best practice
  • Remedial action can be taken immediately for full system protection
  • Allows compliance with boiler warranties
Application, Fitting & Dosing

1. Take a sample of system water which is representative of the system as a whole (drain the water for several seconds before taking the sample)
2. Dip the test strip into the system water for one second and remove
3. Compare to colour chart within 10 seconds
4. Select the colour which most accurately represents the colour observed on the test strip tom confirm the system is fully protected against corrosion and scale formation.

Volumetrics
Filters Sort results
Reset Apply
Product Code
Single Unit Dimensions(Height x Width x Depth)
Single Unit Barcode
Outer Carton Dimensions(Height x Width x Depth)
Outer Carton Barcode (ITF)
62540
86 × 29 × 29 mm
5014551625402
110 x 150 x 180 mm
05014551002289

Newsletter

Country