This proven central heating system inhibitor is suitable for all mixed metal, light commercial and HVAC heating and cooling systems. It provides long-term protection against corrosion, sludge, limescale build-up and bacterial contamination. It has been awarded approvals and accreditations from NSF, ESTR, KIWA and Belgaqua for its effective, non-toxic formulation.
The recommended in-use concentration of the product is 0.5%. Fernox HVAC Protector F1 can be introduced into the system via the feed and expansion tank, or injected directly into the system via a suitable point (e.g. dosing pot). To ensure speedy dispersion, partly or completely drain down and introduce HVAC Protector F1 whilst refilling. In single feed indirect cylinders, e.g. ‘Primatic’ or similar, potable water chemicals must be used. We recommend that untreated systems are thoroughly cleansed and flushed using Fernox HVAC Cleaner F3 before treating with Fernox HVAC Protector F1, as existing debris can damage the installation.
Colour: Light yellow
Odour: Aromatic (faint)
Form: Clear liquid
pH (conc): 8.0
pH (0.5% soln): 7.4 – 8.2
SG: 1.10 at 20°C
Product Code | Single Unit Dimensions | Single Unit Barcode | Outer Carton Dimensions | Outer Carton Barcode (ITF) |
---|---|---|---|---|
59700 |
205 × 230 × 310 mm |
5014551597006 |
310 x 230 x 205 mm |
N/A |
© Fernox 2021. All rights reserved