FC1 Inhibitor 20 Litre

Product Code: 62223 Category:

Fernox FC1 Inhibitor protects against corrosion and limescale formation in light commercial and HVAC heating and cooling systems. FC1 Inhibitor also provides pH buffering to ensure the system water remains within the optimum pH range to prevent corrosion and limescale formation. In line with local regulations and best practice, and for long-term protection of the system, concentration levels should maintained and checked annually as part of the boiler or system service. FC1 inhibitor is compatible with all other Fernox commercial products and is suitable for use with all materials and metals used in central heating systems, including aluminium.

The recommended in-use concentration of the product is 1% v / v%. Fernox FC1 Inhibitor can be introduced into the system via a suitable point (e.g. dosing pot). To ensure rapid dispersion, partly or completely drain down and introduce Fernox FC1 Inhibitor whilst refilling. We recommend untreated systems are thoroughly cleaned and flushed using Fernox FC3 Cleaner before treating with Fernox FC1 Inhibitor, as existing debris can damage the installation. For continued protection we recommend the inhibitor level is checked regularly (annually). The concentration of the product can be easily measured on site using a Fernox Protector Test Kit.

Colour: Light Yellow
Odour: Aromatic (slight)
Form: Clear liquid
pH (conc): 7.8
pH (1% soln): 7.3 – 8.1
SG: 1.05 at 20°C

There are no videos for this product.

Take a look at some of our other videos by clicking here or get in touch with us.

There are no FAQs for this product.

Take a look at some of our other FAQs by clicking here or get in touch with us.

There are no downloads for this product.

Take a look at some of our other downloads by clicking here or get in touch with us.

Filters Sort results
Product Code
Single Unit Dimensions
Single Unit Barcode
Outer Carton Dimensions
Outer Carton Barcode (ITF)
250 × 280 × 365 mm
365 x 280 x 250 mm


© Fernox 2021. All rights reserved