Designed for use with one of the commercial range of Fernox in- line system filters or other similar filters, this unique inhibitor package includes an active dispersant which is proven to aid the safe collection of corrosion, debris and scale via a filter. This inhibitor product enhances the performance of a system filter whilst offering full protection against corrosion and scale formation. This innovative, proven formulation also extends system life and maintains optimum efficiency, while still being an environmentally friendly formulation. Concentration levels should be checked as part of the annual maintenance system service.
The recommended in-use concentration of the product is 1% v / v%. Fernox FC1 Filter Fluid+ Inhibitor can be introduced into the system via a suitable point (e.g. dosing pot). To ensure rapid dispersion, partly or completely drain down and introduce Fernox FC1 Filter Fluid+ Inhibitor whilst refilling. Fernox FC1 Filter Fluid+ Inhibitor is designed to work in tandem with an in-line system filter and has been specifically developed for light or moderately contaminated systems or in circumstances where a comprehensive system clean may not be feasible or practical. In the case of untreated, heavily sludged systems, Fernox advises, where and when possible, that the system is thoroughly cleaned and flushed using Fernox FC3 Cleaner before treating with Fernox FC1 Inhibitor/ FC1 Filter Fluid+ Inhibitor when used in combination with a system filter. FC1 Filter Fluid+ Inhibitor should only be used when a Fernox TF1 Delta Filter, TF1 Omega+ Filter, or other system filter is installed.